Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Fort Worth?
A new garage door installation in Fort Worth typically costs between $700 and $2,200 for the door itself, with labor and hardware included in most full-service quotes. On the low end, a basic single-car steel door runs about $700 to $1,100 installed, while a double-car insulated door with windows and a new opener lands closer to $1,800 to $2,200. The final number depends on door size, material, insulation level, and whether you’re replacing existing hardware or starting from scratch.
Fort Worth homes have a lot of variety in garage configurations: older Ridglea and Arlington Heights bungalows often have detached single-car garages with non-standard openings, while newer builds in Walsh or Alliance Town Center typically use standard 16-foot double doors. That variation is why we always give you a written price before any work starts, not a vague ballpark you have to trust.
Garage Door Installation Cost Breakdown (2026)
Here’s what you can expect to pay for each piece of a garage door installation in the Fort Worth market, based on what we see across Tarrant County in 2026:
| Component or Service | Typical Price Range |
|---|---|
| New single-car steel door (basic, non-insulated) | $700 – $1,100 |
| New single-car door (insulated) | $1,000 – $1,500 |
| New double-car steel door (basic) | $900 – $1,400 |
| New double-car door (insulated, windows) | $1,500 – $2,200 |
| Garage door opener installation (labor + unit) | $250 – $550 |
| Old door removal and haul-away | $80 – $150 |
| Track and hardware replacement | $150 – $350 |
| Panel replacement (per panel) | $250 – $500 |
These ranges reflect what Fort Worth homeowners actually pay in 2026. If you’re replacing a door and keeping the existing opener, you’ll sit at the lower end. If the job requires new framing, custom sizing for an older home, or a high-lift track setup, expect to move toward the upper end or slightly beyond it for unusual configurations.
What most online price guides won’t tell you is that access matters a lot here. Fort Worth summers hit 100 degrees regularly, and a tech working in a 110-degree attached garage needs more time than one working in a shaded carport. Homes with alley-loaded garages, which are common in Fairmount and the Near Southside, sometimes have tighter clearances that add 30 to 45 minutes to the job. That’s the kind of thing a written quote accounts for up front.
If installation isn’t what you need yet, you can always start with our Garage Door Installation in Fort Worth service page for a broader look at how we handle full installs from measurement to final walkthrough.
What Affects Garage Door Installation Pricing in Fort Worth
The range between $700 and $2,200 exists for real reasons. Here are the factors that move your quote in one direction or the other, specific to this market.
- Door width and height. Most modern Fort Worth homes built after 1990 have standard 16-foot by 7-foot double doors or 9-foot by 7-foot singles. But homes in neighborhoods like Wedgwood or Handley, many constructed in the 1960s and 70s, often have 8-foot single doors or non-standard widths that require special ordering, which adds $150 to $400 to the door cost.
- Insulation and material. A non-insulated steel door is fine for a detached garage you never spend time in. But if your garage is attached to the house and you notice your utility room or kitchen stays hot in August, an insulated door with an R-value between 12 and 18 makes a measurable difference. Insulated doors run $300 to $700 more than non-insulated ones. Polyurethane insulation costs more than polystyrene but seals better against Texas heat.
- Opener replacement. If your opener is older than 10 years or is a chain-drive model that’s been struggling, installation is the right moment to upgrade. A new belt-drive opener adds $250 to $550 to the total, and it’s quieter, which matters if you have a bedroom above the garage. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so the tech who arrives already knows your specific door and opener setup.
- Old door removal and disposal. Most full-install quotes include haul-away, but some cut-rate providers leave the old door at your curb. Factor $80 to $150 for a proper removal if it’s not built into the price. Fort Worth’s bulk waste pickup won’t take a full garage door, so this cost is unavoidable unless you have a truck and a strong back.
- Structural condition of the opening. Termite damage, water-rotted jambs, or sagging headers are common in older Fort Worth homes, especially those built before 1980 in areas like Stop Six or Riverside. If the framing needs reinforcement, lumber and labor add $200 to $500. A reputable installer will flag this before installing the new door, not after the old one is already in pieces.
- Time of year. Fort Worth’s hail season runs March through May, and garage door companies get slammed with insurance-repair work right after a storm. Booking an installation during a calm stretch means faster scheduling and sometimes better availability on premium door models.
How to Save on Garage Door Installation
You don’t have to pay the top of the range. Here’s how Fort Worth homeowners keep installation costs reasonable without cutting corners that bite back later.
Replace the door before the opener fails. If your door is 15 to 20 years old and your opener is still working, you can install the new door and keep the existing opener. That saves $250 to $550 immediately. Just be aware that a new insulated door is heavier than an old non-insulated one, so the opener may need a tension adjustment, which a tech can handle during the same visit.
Skip windows on a single-car door. Windows add curb appeal but also $150 to $300. If your single-car garage faces an alley or the side of the house, no one sees it anyway. Save the money or put it toward insulation instead, which pays back in energy savings during Fort Worth’s brutal summers.
Ask for an itemized written quote. This is the single best way to avoid surprise charges. At Marlow Garage Door Repair, you get a written price before any wrench turns. That number is locked. If the tech discovers a hidden framing issue mid-job, we stop, explain what changed, and get your sign-off before proceeding. The number on the invoice matches the number you agreed to. That’s not a special request; it’s how every job works.
Bundle the opener with the door. If your opener is on its last legs, replacing it during a door installation is cheaper than scheduling a separate opener install later. You save on the second trip charge and often get a better package price. Opener installation runs $250 to $550, and when bundled, you’re looking at the lower end of that range in most cases.
Get a free estimate. Estimates at Marlow are free, and they’re specific. Not “garage doors start at $X” but a real number for your exact door size, your material choice, and your neighborhood’s access conditions. Call us at (682) 432-0305 and we’ll walk you through the options in about 10 minutes if you’d like, or book online and get the written price after a quick measurement.
Installation vs. Repair: Which One Do You Actually Need?
Not every garage door problem means a full replacement. A lot of Fort Worth homeowners call us expecting to spend $1,500 on a new door when the actual fix is a $180 spring replacement or a $130 cable repair. Here’s the honest math.
If your door is under 15 years old and the panels are in decent shape, repair almost always wins. Spring repair in the Fort Worth market runs $180 to $340. Cable repair is $130 to $250. A full door replacement starts at $700. The tradeoff is obvious.
Replace the door when: the panels are dented or rusted through, the door is over 20 years old, you want insulation and your current door has none, or the tracks are so worn that a new door would be cheaper than rebuilding the existing system. If you’re not sure, a technician can assess it in about 20 minutes and give you the repair number and the replacement number side by side so you can decide with real data.
If you’d rather dig deeper into the repair side before deciding, visit our home page to see the full range of repair services we offer across Fort Worth, from spring and cable work to opener diagnostics.
How the Installation Process Works With Marlow
Here’s exactly what happens when you book a garage door installation with us, step by step. We designed this process to answer the two questions homeowners ask most: what is this going to cost, and when will you actually be here.
- Book the appointment. You can call us at any hour, day or night, and a live person answers. Not a recording, not a callback queue. Or book online in under two minutes. You’ll pick a time that works, and you’ll receive a live arrival window you can track, which is part of what we call the Relay Visibility Guarantee.
- Measurement and written quote. The tech arrives, measures your opening, checks the condition of the existing track and framing, and reviews door options with you: material, insulation, windows, and opener compatibility. Before any work starts, you get a written price. That number is locked.
- Installation day. The tech removes the old door, hauls it away, installs the new door and hardware, tests the balance and safety sensors, and walks you through the opener settings if you replaced that too. Most standard installs take 3 to 5 hours from arrival to final test.
- Before-and-after photos and digital invoice. You get photos of the completed work and an invoice you can pay from a texted link. No paper checks, no calling an office to settle up.
- 365-Day Done Right Promise. If anything about the installation isn’t right within a full year, we come back and fix it at no charge. That promise is in writing, and it applies to every installation we do. No fine print, no prorated coverage.
Jaylen Ross, who leads our Fort Worth operation, put this process in place for one reason: homeowners here are tired of guessing. They want the same transparency from a garage door company that they get from every other service they book from their phone.
Why Fort Worth Homeowners Choose Full Visibility Over the Lowest Bid
We don’t try to be the cheapest garage door installer in Fort Worth. Someone will always undercut the next bid by $50. What we do is remove the uncertainty that normally comes with this kind of project.
When you hire Marlow, you know the price before the work starts. You know when the tech is arriving, and you can watch them on the map. You know the person walking up your driveway has passed a background check and is wearing a uniform that identifies them. You know the work is covered for a year, in writing.
That’s what the 365-Day Done Right Promise means in practice: if the door makes a noise it shouldn’t, if the balance is off, if anything about the installation fails within 365 days, we come back and make it right. Free. No argument about whether it’s a “new problem.”
Fort Worth has plenty of garage door companies. What it doesn’t have enough of is companies willing to put the number in writing and stand behind it for a full year.
FAQs – Garage Door Installation Cost
How much does a basic garage door install cost in Fort Worth?
A basic single-car non-insulated steel garage door installed runs $700 to $1,100 in Fort Worth. That includes the door, hardware, removal of the old door, and standard labor. If your opening is standard size and the framing is in good condition, you’ll land near the lower end of that range.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper. Spring replacement runs $180 to $340, cable repair $130 to $250, and most general garage door repairs fall between $150 and $600. A full replacement starts at $700. If your door is under 15 years old and structurally sound, repair the components. Replace only when panels are damaged, the door is over 20 years old, or you’re upgrading for insulation. Call (682) 432-0305 and we’ll give you both numbers so you can decide with real data.
How long does garage door installation take?
A standard single or double door replacement takes 3 to 5 hours from arrival to final safety test. Non-standard openings, custom door sizes, or structural framing work can push that to a full day. You’ll know the timeline before we start, and your live arrival window means no waiting through a four-hour block wondering when the tech will show.
Can I install a garage door myself to save money?
You can, but garage doors involve high-tension springs that carry hundreds of pounds of force. A single mistake can cause serious injury. Beyond the springs, proper track alignment and opener calibration require specialized tools and experience that most homeowners don’t have. What you’d save on labor you’ll likely spend on a service call to fix a door that’s now binding or off-track, plus the time and frustration. The safer move is a written quote from a pro so you know the real number before committing. Estimates are free: call (682) 432-0305.
Do Fort Worth homeowners need a permit for garage door installation?
In most cases, no. Replacing an existing garage door with a new one in the same opening does not require a permit in Fort Worth. If you’re changing the structural framing, widening the opening, or converting a carport to an enclosed garage, that’s a different story and likely needs a building permit from the City of Fort Worth Development Services Department. A licensed installer can tell you in the first five minutes whether your specific project triggers a permit requirement.
What’s the best garage door brand for Texas heat?
Any of the major brands we service (LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor) can handle Fort Worth heat, but the brand matters less than two specifications: insulation type and steel gauge. A polyurethane-insulated door with at least 24-gauge steel panels holds up to Texas sun better than a thin, non-insulated door. Clopay and Amarr both make strong insulated models in the $1,200 to $2,000 range for double doors, and they’re two of the brands our techs are certified to work on.
Get a Written Price Before You Decide
You shouldn’t have to guess what a garage door installation costs. You shouldn’t have to wonder when the tech will arrive or whether the number will change when the invoice comes. At Marlow Garage Door Repair, those questions get answered up front, every time.
Call (682) 432-0305 for a free estimate. A live person answers, day or night. Or book online and get a written price before any work begins. Either way, you’ll know exactly what you’re paying before the first wrench turns, and you’ll have a full year of coverage behind it.
Pricing reflects the Fort Worth market as of 2026. Marlow Garage Door Repair Fort Worth offers free estimates – call (682) 432-0305.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair, serving Fort Worth since 2002.
What Our Customers Say
"Opener remote stopped working. He reprogrammed it and replaced the battery contacts. Paid by link on my phone."
- Latoya S."I could see the tech's name and ETA in the text. Showed up right when the tracker said. Cable repair done in under an hour."
- Omar B."Cable came off the drum. Fast and neat. He re-seated it on the drum and checked the tension before he left."
- Kevin D.