Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Fort Worth?
Panel replacement in Fort Worth typically costs $250 to $500 for a single panel on a standard residential garage door, with most homeowners paying around $325 to $375 when labor and materials are bundled. That price covers removal of the dented or broken panel, installation of a color-matched replacement, and a final alignment check so the door opens smooth and even. If you’re replacing multiple panels or dealing with a door that’s more than 12 years old, you’re often better off comparing the cost of a full door replacement, which runs $700 to $2,200 in this market.
We quote a written, line-item price before any work starts. No “we’ll see once we open it up” numbers. You’ll know the total before the first panel comes off the hinges.
- Single panel replacement in Fort Worth: $250 – $500 all-in, typical.
- Multi-panel damage: often smarter to consider a new door ($700 – $2,200) than patch three or four panels.
- Color matching, door brand, insulation type, and panel size all move the price.
- Marlow writes the price down before work begins, and every panel job carries our 365-Day Done Right Promise.
- Free estimates by phone: (682) 432-0305, answered by a real person 24/7.
Panel Replacement Cost Breakdown (2026)
Here’s what the numbers actually look like for Fort Worth and surrounding areas like Arlington, Benbrook, Keller, and Mansfield. We base these on what we see on service calls every week, not on a national average pulled from a survey.
| Line Item | Cost Range in Fort Worth | Notes |
|---|---|---|
| Single steel panel (standard 16’x7 door) | $150 – $280 | Most common material. Color-matched to faded door means a slight premium. |
| Labor for single panel replacement | $100 – $220 | Includes removal, re-hinge, and alignment. |
| Insulated panel | $210 – $380 | For doors with foam-core or polyurethane insulation. Heavier, takes longer to align. |
| Custom color or wood-grain panel | $280 – $500 | Amarr, Clopay, and Wayne Dalton custom finishes push toward the top of the range. |
| Window insert added to replacement panel | $60 – $180 per window | Only if your existing panels have windows and you want them matched. |
| Full door replacement (if multiple panels are damaged) | $700 – $2,200 | Often the smarter call when three or more panels are dented or rusted through. |
Those are the numbers you should plan around for 2026 in Fort Worth. The spread between $250 and $500 for a single panel comes down to three things: the brand of door you own, whether the panel is insulated, and how precisely we need to match the existing paint. A faded white steel door from 2013 will never match a factory-fresh white panel, so we factor a color-blend charge into the quote and tell you about it up front.
If you’re already within a few hundred dollars of a new door, we’ll tell you that too. We make more money replacing a full door, but we’d rather give you the honest comparison and let you decide. Most Fort Worth homeowners looking at $450 for one panel on a 14-year-old door end up asking about full replacement anyway.
What Affects Panel Replacement Pricing in Fort Worth
- Door brand and availability. LiftMaster and Chamberlain don’t make door panels – they make openers. For panels, you’re dealing with Clopay, Amarr, Wayne Dalton, and the like. If we can source the exact panel from a local Fort Worth supplier, it’s cheaper than waiting on a custom order from the manufacturer.
- Panel insulation type. Non-insulated single-layer steel is the cheapest to replace. If your door has a foam core or polyurethane insulation – common in newer homes in neighborhoods like Walsh Ranch or Sendera Ranch – the panel itself costs more and weighs more, which adds labor time.
- Door age and color fade. A panel on a one-year-old door bolts on and matches immediately. A panel on a 2009 door in Texas sun has faded several shades. We use a spectrophotometer to blend the paint so the repair doesn’t look like a patch job.
- Number of panels damaged. A single dented panel from a bike handlebar or a trash can hit is one thing. A car that backed into the bottom two panels is another. Once you’re replacing three panels, the math tilts toward a new door.
- Hardware condition. If the hinges, rollers, or track brackets on the damaged panel are bent, we’ll need to swap those too. That’s usually $110 to $220 extra for rollers and $120 to $240 if the track got knocked out of alignment.
- Where you live in the Fort Worth metro. We don’t charge by ZIP code, but drive time and tolls to places like Aledo, Burleson, or Saginaw do get factored into our dispatch. The closer to the city core you are, the more likely we can get a tech to you same-day without any trip-charge surprises.
Is It Cheaper to Repair or Replace a Panel?
For a single panel, repair is almost always the cheaper option: $250 to $500 versus $700 to $2,200 for a new door. The exception is when your door is old enough that the replacement panel will stand out no matter how well we blend it, or when the damage is extensive enough that you’re looking at three or more panels. At that point, replacement gets you a new door with a new warranty for about the same money as piecing together a 2009-era door.
We walk every customer through this comparison on the phone before we even dispatch a tech. You’ll hear options, not a sales pitch. Call (682) 432-0305 and you’ll get a real person who can talk through your specific door.
How to Save on Panel Replacement
The biggest savings lever in Fort Worth is acting before a small dent becomes a structural problem. A panel hit by a basketball or a kicked-up rock often just needs replacement – but leave it bent for months and the misalignment starts wearing your rollers, stressing your cables, and throwing your track off. Then a $300 panel job becomes a $600 repair.
Other ways to keep the number down:
- Know your door brand and model before you call. The label is usually on a sticker near the bottom edge of the door or on the side jamb. Knowing you have a Clopay 4050 versus a generic steel door helps us source the right panel the first time.
- Replace the panel, not the whole section. Sometimes a dent is limited to one panel within a section. We’ll tell you if that’s the case. Some companies quote a whole section because it’s easier for them.
- Take the free estimate. We don’t charge to come out and look. You’ll get a written price, and if you don’t like it, you’re out nothing but 20 minutes.
- Avoid the “wait and see” trap. A bent panel causes the door to sit uneven in the tracks, which wears things fast. Fix it in week one and you won’t be paying for rollers and cables in month three.
The simplest version: call (682) 432-0305, tell us what happened, and we’ll get you a real number without waiting for a four-hour window. You’ll see your tech’s live ETA before they pull up.
How the Marlow Process Works
If you’ve never booked a garage door repair before, here’s exactly how it goes with us:
- You call or book online. A live person answers, 24/7. No voicemail. No “press 2 for sales.” You tell us what happened to the door, and we ask a few questions to figure out if it’s a panel, a spring, or something else.
- We quote a range on the spot. For panel replacement, that’s $250 to $500 depending on what we confirm when the tech arrives. You’ll get a written price before any work begins – not an estimate that changes at the invoice.
- You watch the tech come to you. Our dispatch system gives you a live arrival window you can track from your phone. You’ll see your tech’s name and photo before they knock.
- The tech confirms the work and the price. They’ll inspect the door, confirm the panel damage, and hand you a written quote. You approve it. Then they work.
- You pay from a link. Digital invoice, texted to you. Pay online or in person. No surprise line items, ever.
- You’re covered for a full year. Every panel replacement carries our 365-Day Done Right Promise. If the fix isn’t right, we come back and make it right. Free. That’s a year of coverage in writing, not buried in fine print.
That process is what we call The Relay Visibility Guarantee. It’s not a tagline. It’s the operating standard we’ve been held to since Marlow opened its doors in 2002 as part of the Relay Home Co. family of home-service businesses. Live ETA, before-and-after photos, written price, digital invoice. Every job, no exceptions.
FAQs – Panel Replacement Cost
How much does it cost to replace one garage door panel in Fort Worth?
One panel on a standard Fort Worth home door costs $250 to $500 including labor and materials. The exact number depends on panel brand, insulation, and color matching. We give you a written price before work begins. Call (682) 432-0305 for a free estimate.
Is it cheaper to replace one panel or the whole garage door?
One panel is cheaper: $250 to $500 versus $700 to $2,200 for a new door. But if you need three or more panels replaced, or the door is over 12 years old, a new door often makes more sense. We’ll compare both options and let you decide.
Can you match the color of my existing garage door panel?
Yes. Faded or not, we match the existing color as closely as the material allows. In bright North Texas sun, the match won’t be invisible on an older door, but we blend to minimize the contrast. Newer doors are often a near-perfect match straight from the manufacturer.
How fast can you replace a panel in Fort Worth?
Most single-panel jobs are done the same day we arrive. If the panel needs a custom order from the manufacturer, you’re typically looking at 3 to 10 business days. We’ll track the panel and keep you posted, and your tech will be on-site the day it lands. Call (682) 432-0305 to see if we can get you on today’s schedule.
Do you charge for estimates on panel replacement?
No. Estimates are free. You’ll get a real number, in writing, before any work starts. If you decide not to go through with it, that’s fine – you owe us nothing.
What if the new panel doesn’t fix the problem?
Then we come back and make it right. That’s what the 365-Day Done Right Promise is: a full year of coverage, in writing, on every panel replacement we do in Fort Worth. If the repair fails within a year, the second visit is free.
Get a Free Panel Replacement Estimate in Fort Worth
If your door has a dent, a crack, a rusted-through panel, or damage from one too many Texas hailstorms, call (682) 432-0305. You’ll talk to a live person who can give you a real price range for your door, often right on the first call. Then we’ll send a background-checked, uniformed tech out with a written quote and a live ETA you can follow from your phone.
We’ve been fixing doors in Fort Worth since 2002, and we’ve trained our techs on eight major brands – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. When we pull up, we already know your door. Learn more about our panel replacement service in Fort Worth or head back to our home page to see everything we do.
Pricing reflects the Fort Worth market as of 2026. Marlow Garage Door Repair Fort Worth offers free estimates – call (682) 432-0305.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair Fort Worth, serving Fort Worth since 2002.
What Our Customers Say
"Opener remote stopped working. He reprogrammed it and replaced the battery contacts. Paid by link on my phone."
- Latoya S."I could see the tech's name and ETA in the text. Showed up right when the tracker said. Cable repair done in under an hour."
- Omar B."Cable came off the drum. Fast and neat. He re-seated it on the drum and checked the tension before he left."
- Kevin D.