Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateTrusted Garage Door Repair for Fort Worth Homeowners
A garage door that won’t open usually fails at the worst possible moment. You’re already late for work, the kids are asking why the car won’t move, and now you’re staring at a door that won’t budge. That’s the moment Marlow Garage Door Repair Fort Worth handles best. We’ve been fixing garage doors across Fort Worth since 2002, and our techs arrive in trucks stocked with parts for eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Jaylen Ross leads our Fort Worth team, and he’s built our reputation on one simple rule: you get a written price before any wrench turns. Call (682) 432-0305 and a live person answers, day or night.
Key Takeaways
- Garage door repair in Fort Worth typically runs $150 – $600, with exact pricing quoted before work begins.
- Every repair is backed by our 365-Day Done Right Promise in writing.
- We service eight major brands with OEM parts on the truck.
- A live person answers (682) 432-0305 24/7. No voicemail, no callback queue.
Garage Door Sensor Repair
Garage door sensor repair fixes the photo-eye units mounted about six inches off the floor on either side of your door opening. These sensors shoot an invisible beam between them, and if something breaks that beam, the door refuses to close. That’s a safety feature doing its job. But when the sensors fall out of alignment, collect dust, or wear out, the door misbehaves even when nothing is in the way. You’ll press the button, the door will start down, then reverse for no apparent reason. Sensor issues account for a big share of no-close calls we handle across Fort Worth, from Benbrook to Lake Worth, and our Sensor Calibration service quickly restores proper alignment. Most sensor repairs run $120 – $320, and our techs carry replacement sensors for Genie and Chamberlain units on every truck, so one trip usually solves it.
Why the Door Reverses
A sagging bracket, a jolt from a lawnmower, or even sunlight hitting the lens at the right angle can break the beam. We test alignment with a level and verify the sending and receiving units are wired correctly before replacing anything you don’t need.
When the Green Light Matters
Each sensor has a small indicator light. If one is blinking or dark, that’s telling you something specific. We diagnose whether it’s the sensor itself, the wiring, or the logic board, then quote the fix in writing before touching a screw.
Styles & brands we work with
Emergency Garage Door Repair
Emergency garage door repair means we get a technician to your Fort Worth home fast when the door is stuck open, stuck closed, or hanging crooked. Spring failure is the most common emergency we see, and it always seems to happen at 7 a.m. on a Monday. When that torsion spring, the horizontal coil above your door that does most of the lifting, snaps, the door becomes dead weight. You can’t lift it, and you can’t drive through it. Our line is answered by a real person 24 hours a day, 7 days a week, and our Fort Worth techs carry both torsion and extension springs, cables, and rollers on the truck. Emergency repairs typically run $150 – $600 depending on what failed, and you’ll know the exact number before we begin.
What Counts as an Emergency
A snapped spring, a door jammed halfway up, or a cable that’s come off its drum all qualify. These aren’t just inconvenient; they leave your home exposed if the door won’t close, or trap your car inside if it won’t open.
How Fast We Get There
We dispatch from within Fort Worth, not from a distant regional hub, so response times stay short whether you’re near Forest Hill or Sansom Park. Once scheduled, you get a live arrival window you can track on your phone. No four-hour guessing game.
Garage Door Panel Replacement
Panel Replacement swaps out a dented, cracked, or rusted section of your door without replacing the whole assembly. A single panel takes most of the abuse. Kids on bikes, faded clearcoat from North Texas sun, or a misjudged parking job can leave one section looking rough while the rest of the door works fine. Replacing that panel instead of the full door makes financial sense when the damage is isolated. Marlow Garage Door Repair Fort Worth matches panel colors and styles for major manufacturers including Clopay and Amarr, then installs the new section so it blends with the existing door. Panel replacement typically runs $250 – $500, and we quote the exact price, including the panel, hardware, and labor, before ordering anything.
Matching a Single Panel
Color fade is real in Fort Worth. We pull the manufacturer, model number, and current shade from your existing door, then order from the same supplier. The goal is a repair you can’t point to from across the street.
When Replacement Beats a New Door
If the damage is confined to one or two panels and the door’s mechanisms are sound, a panel replacement costs a fraction of a new installation. We’ll tell you honestly if the numbers don’t make sense, because we’d rather give you the right answer than a bigger invoice.
Garage Door Maintenance
Garage door maintenance is the scheduled tune-up that catches small problems before they become $600 failures. We recommend it once a year for most Fort Worth homes, especially if your door faces west and bakes in the afternoon sun. Over time, rollers wear, hinges loosen, tracks drift, and bearing plates lose their seal. A maintenance visit includes lubrication, torque checks on the springs, track alignment, safety sensor testing, and a close look at every bolt and bracket. Typical maintenance runs $150 – $300, and the visit includes a written report of anything that needs attention now, and what can wait. Most importantly, you’ll know the price of any recommended repair before you agree to it.
What We Inspect
We check spring tension, roller condition, cable wear, hinge tightness, track alignment, opener force settings, and sensor function. It’s the same checklist we’d use on our own doors, and we show you what we found before we leave.
Why Once a Year Matters
The springs on your door are rated for a certain number of cycles, roughly 10,000 for standard springs. That’s about seven years of average use, but harder if you’re opening and closing the door five times a day. Annual maintenance lets us track wear and replace components before they snap.
Garage Door Roller Replacement
Roller Replacement removes the worn wheels that guide your door up and down the tracks. You’ll hear the symptoms before you see them: grinding, squealing, or a door that sounds like it’s dragging something heavy. Rollers are the workhorse of the system, riding in the track every time the door moves. Once the bearings degrade, the roller stops rolling and starts sliding, which puts strain on the motor, the hinges, and the springs. We replace worn rollers with nylon or steel units depending on your door weight and noise tolerance. Roller replacement typically runs $110 – $220, and we do all of them at once so the door rides evenly.
Signs Your Rollers Are Worn
Listen for a grinding noise or a wobble as the door moves. If the door shakes or seems to hesitate at the same point every time, a flat-spotted roller is often the culprit.
Nylon vs. Steel
Nylon rollers run quieter and are gentler on tracks, which matters if your bedroom sits above the garage. Steel rollers cost less upfront. We’ll quote both and let you decide based on your budget and noise tolerance.
Commercial Garage Door Repair
Commercial garage door repair maintains and fixes the heavier, higher-cycle doors on warehouses, auto shops, and storefronts across Fort Worth. These doors take abuse: forklift contact, constant open-and-close cycles, and less forgiveness for deferred maintenance. A commercial door that’s down means inventory can’t move and staff stands around getting paid to wait. We repair commercial doors including high-lift tracks, rolling steel curtains, and heavy-duty openers. Commercial repair work runs $150 – $600 for common fixes, with larger jobs quoted on a walkthrough that’s free of charge. We schedule off-hours work when your facility needs it, so you’re not shutting down during business hours in Saginaw or Everman.
Minimized Downtime
We move quickly because we know every hour that bay door is closed costs you money. Our trucks carry commercial-grade rollers, hinges, and opener components to get you operational in one trip when the issue is straightforward.
Preventive Agreements
For facilities that depend on their doors daily, we offer scheduled maintenance agreements. Quarterly inspections catch cable fray, track misalignment, and opener strain before they become a Tuesday-morning shutdown.
Brands We Service
We’re certified to service eight major garage door brands, and we carry OEM parts for most of them on every truck. That matters because a Chamberlain opener doesn’t always play nicely with a generic part, and a Clopay panel needs the right gauge and emboss pattern to look original. Our techs are trained on LiftMaster and Chamberlain openers specifically, covering travel limits, force settings, and logic board diagnostics. If your opener is older, we know which discontinued models still have available parts and which are realistically done.
For doors, we work extensively with Clopay and Amarr panels, rails, and hardware. We’ve matched replacements on doors that have been out of production for a decade, pulling manufacturer spec sheets and matching the pattern. We also service Genie openers and Raynor doors, which we see regularly in older Fort Worth neighborhoods like Haltom City and River Oaks. Whether you have a Chamberlain, Genie, Clopay, Amarr, or any other make, we can help. Call (682) 432-0305 and we’ll tell you what parts your door needs and whether they’re on the truck.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Door only opens a few inches, then stops. This often means a spring has snapped, and the opener is struggling against dead weight. The door can drop hard and fast if the cable lets go, so this is one repair to schedule immediately rather than manage.
- Loud bang from the garage, like a firecracker. That sound is a torsion spring breaking under tension. It’s sudden, it’s loud, and it leaves the door unsafe to operate. Call us right away; we’ll send a tech with the right spring size.
- Door sits crooked or moves unevenly. A tilted door can mean a broken cable or a spring that’s lost tension on one side. Running the opener like this bends tracks and strains the motor, making a $130 cable fix into something more expensive.
- Opener runs, but the door doesn’t move. The first thing to check is the emergency release cord. After that, if the carriage isn’t engaging, the problem is usually a stripped gear or a broken coupler inside the opener. We diagnose and quote before touching anything.
- Visible cable fraying or rust around the spring area. High-tension cables and springs wear out, especially in humid North Texas summers where garage interiors trap moisture. If you see frayed strands or rust, book an inspection before it snaps.
Our Process, Step by Step
- 1
Call or book online in seconds. You can call (682) 432-0305 24/7 and talk to a live person, or book online without a single phone call. You’ll get a live arrival window you can track from your phone, not a four-hour block.
- 2
Your tech arrives and diagnoses. A background-checked, uniformed Marlow technician shows up in a marked truck. We inspect the door, opener, springs, cables, tracks, and sensors. We test cycle times and force settings, and we photograph what we find.
- 3
You get a written price before work begins. We write the exact cost of the repair, parts and labor included, and hand it to you. The number on that written quote is the number on your invoice. If you don’t approve it, no work happens. No surprises at the end.
- 4
Repair is done with parts from the truck. Most repairs are completed same-visit because we stock springs, cables, rollers, sensors, and opener parts for eight major brands. If we need to order a specialty panel, you’ll know the lead time and the total cost up front.
- 5
You get the 365-Day Done Right Promise. Every repair is backed in writing for a full year. If the fix doesn’t hold, we come back and make it right at no charge. You also receive before-and-after photos and a digital invoice you can pay from a link.
How Much Does Garage Door Repair Cost in Fort Worth?
A typical garage door repair in Fort Worth runs $150 – $600, depending on what failed and the parts involved. Spring repair is the most common job we do, and it typically runs $180 – $340. Cable replacement, which often accompanies spring work, runs $130 – $250. Opener repairs land between $120 – $320, while a full opener installation runs $250 – $550. If a panel is dented beyond repair, expect $250 – $500 for a matched replacement. Roller replacement is one of the more affordable fixes at $110 – $220. Track realignment, often needed after a door gets knocked off its path, runs $120 – $240. And if the door itself is done, a new door installation in Fort Worth runs $700 – $2200 depending on size, material, and insulation.
What affects the price? Three things mostly: the part that failed, the brand and age of your door, and the time of day for emergency calls. Springs are sold in different sizes and cycle ratings, so a heavier custom door needs a pricier spring than a standard single-car door. Older doors sometimes need additional hardware because the existing brackets or hinges are no longer available. To avoid overpaying, get a written quote before any work starts and ask what’s included. Our free estimate covers the diagnosis, the written price, and our recommendation on what’s urgent versus what can wait. We’ll never quote you a spring and then discover your cables are bad and inflate the invoice. The price you approve is the price you pay, and the 365-Day Done Right Promise covers it for a year.
Our Service Area Near Fort Worth
Marlow Garage Door Repair Fort Worth serves the entire metro area, including Garage Door Repair in Burleson and Garage Door Repair in Mansfield, plus Saginaw, Benbrook, Azle, Forest Hill, Lake Worth, Everman, River Oaks, Sansom Park, and Haltom City. Typical response time inside Fort Worth is under 90 minutes for emergency calls, and slightly longer for the outlying cities. Since we dispatch locally rather than from a central hub across the metroplex, you’re not waiting on a tech to drive across DFW traffic. You can learn more about our full range of services on our home page or see the specifics of our Garage Door Repair in Fort Worth coverage.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Repair in Fort Worth
Garage door repair is the process of diagnosing and fixing any component of your garage door system that isn’t working properly, including springs, cables, rollers, tracks, panels, sensors, and openers. A repair might be as simple as realigning a sensor or as involved as replacing a snapped torsion spring and the cables that failed with it. At Marlow Garage Door Repair Fort Worth, every repair starts with a diagnosis and ends with a written price before any work is done.
Most common repairs, like spring replacement or sensor alignment, are done in under 90 minutes. Panel replacement can take longer because the panel often has to be ordered from the manufacturer. When you book, we’ll tell you what to expect based on your specific issue.
Garage door repair in Fort Worth typically runs $150 – $600, with spring repair at $180 – $340, cable repair at $130 – $250, and opener repair at $120 – $320. The exact cost depends on your door’s brand, the failed part, and whether any secondary damage occurred. You’ll receive a written quote before we start, so there are no surprises. Call (682) 432-0305 for a free, no-obligation estimate.
Yes, we service all four of those brands, plus LiftMaster, Wayne Dalton, Craftsman, and Raynor. Our techs are trained on each brand’s specific opener settings, spring systems, and panel patterns. We carry OEM parts for most of these brands on the truck, so repairs are usually completed in a single visit.
Yes. We answer the phone 24 hours a day, 7 days a week, and we dispatch emergency repairs throughout Fort Worth and the surrounding cities. A snapped spring or a door stuck open is an emergency we handle the same day. Call (682) 432-0305 and a live person will schedule your repair immediately.
Every repair we make is covered by our 365-Day Done Right Promise. That’s a written guarantee: if the repair fails within a year, we come back and fix it free of charge. It covers parts and labor, and it’s stated on your invoice, not buried in fine print.
Clear a path in the garage so we can reach the door, the opener, and both tracks. If you have any specific sounds or behaviors you’ve noticed, jot them down so you can describe them. You don’t need to be home for the entire visit if the appointment is booked with a digital link, but we do need access to the garage. Your tech will confirm the live arrival time when they’re on the way.
Schedule Your Garage Door Repair Service in Fort Worth Today
Don’t fight a garage door that won’t cooperate. Call (682) 432-0305 now and a live person answers, day or night. You’ll get a written price before any work starts, a 365-Day Done Right Promise on every repair, and a live arrival window you can track on your phone. Your free estimate is no-obligation, and it comes with the honest answer about what your door needs right now.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair Fort Worth, serving Fort Worth since 2002.