Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Fort Worth?
Garage door spring replacement in Fort Worth typically costs $180 to $340 for a single torsion spring, with most homeowners paying around $260. If both springs need replacement, which is often the case since they wear at the same rate, expect to pay $340 to $680. You’ll see the exact written price before any work starts, so there are no surprises on the invoice.
Spring replacement is one of those repairs that falls somewhere between “annoying expense” and “must fix today.” A broken spring means your door won’t lift, which means your car is either trapped inside or left unprotected outside. The good news is this is a routine job for any experienced garage door tech, and in Fort Worth it’s usually completed the same day you call.
Spring Replacement Cost Breakdown (2026)
Here’s what spring replacement actually costs in Fort Worth right now, broken out by what you’re paying for:
| Cost Component | Price Range |
|---|---|
| Single torsion spring (parts + labor) | $180 – $340 |
| Double torsion spring replacement | $340 – $680 |
| Extension spring replacement (older doors) | $150 – $300 |
| Spring + cable replacement (recommended together) | $310 – $590 |
| Service call fee (waived with repair) | $49 – $89 |
These numbers reflect the Fort Worth market as of 2026. They include the spring itself, installation labor, and a basic safety check of the door’s balance and travel. What they don’t include is the cost of doing nothing: a door that won’t open reliably, a car stuck in the garage when you’re already late for work off I-35W, or the strain a single overworked spring puts on your opener motor.
Most Fort Worth homes built in the last 25 years, whether they’re in Wedgwood, North Richland Hills, or over near TCU, use torsion springs rather than the older extension spring design. Torsion springs sit on a horizontal bar above the door opening and do the bulk of the lifting. Extension springs run along the horizontal tracks on either side. Both eventually fail, but torsion springs are more common and slightly more expensive to replace because the installation is more involved.
What Affects Spring Replacement Pricing in Fort Worth
No two garage doors are identical, and a handful of factors push the final price toward the top or bottom of the range:
- Spring cycle rating. Garage door springs are rated by cycles – one full open-and-close equals one cycle. Standard springs are rated for 10,000 cycles, which is roughly 7 to 10 years of normal use. High-cycle springs rated for 25,000 to 50,000 cycles cost $30 to $60 more per spring but last significantly longer. In Fort Worth, where the heat and humidity fluctuate through the year, higher-cycle springs often make sense because they resist fatigue better.
- Whether both springs need replacement. Garage doors typically have two springs that wear at the same rate. If one has snapped, the other is likely close behind. Replacing both at once costs more upfront but avoids a second service call in six months. It’s the recommendation Marlow’s techs make most often, but it’s always your call.
- Door weight and size. A double-wide door on a three-car garage in far north Fort Worth needs heavier springs than a single door on a 1960s ranch in Ridglea. Heavier springs cost more, plain and simple.
- Spring type and brand. We stock springs compatible with the major door brands – Clopay, Amarr, Wayne Dalton, Raynor, and others – and the specific spring required affects parts pricing. Our techs are trained on eight major garage door brands, so the spring that goes on your door is the right one the first time.
- Time of service. Nights, weekends, and holidays are when springs break most often, and emergency service carries a slight premium. Marlow answers the phone live 24/7, but the price for a 2 a.m. call on a Sunday will run higher than a Tuesday morning appointment.
- Door condition. If the cables are frayed, the rollers are shot, or the tracks are out of alignment, those issues affect the spring replacement. The spring works in concert with every other part of the door system.
How to Save on Spring Replacement
Spring replacement isn’t a place to pinch pennies on parts, but there are legitimate ways to keep the total bill reasonable:
- Replace both springs at once. It sounds counterintuitive, but the single most expensive way to handle spring failure is to replace one spring, then pay for a second service call when the other one snaps four months later. You pay for two trips instead of one.
- Bundle with a maintenance check. If your door needs rollers or a track adjustment anyway, doing it during the same visit is cheaper than scheduling a separate appointment. Ask the tech what they see while they’re working.
- Ask about spring cycle options. Standard springs are cheaper today, but high-cycle springs can pay for themselves if you plan to stay in the house more than five years. A $40 premium now beats a $300 replacement in eight years.
- Get a written price before work starts. The number you agree to should be the number on the invoice. Marlow delivers a written price before any wrench turns, so you know exactly what you’re paying before you commit.
- Call for a free estimate. If you’re not sure whether the spring has failed or something else is going on, call us at (682) 432-0305. We’ll talk through what you’re seeing and give you a realistic price range before anyone even schedules a visit.
Why Spring Replacement Costs What It Does
Spring replacement is a skilled job, and the price reflects that. The spring itself is the easy part to understand: you’re buying a piece of heat-treated steel engineered to lift 150 to 250 pounds thousands of times before it fails. What you’re mostly paying for is the installation, and that requires specific training and the right tools.
A torsion spring is wound under serious tension. When it’s being installed, it has to be wound to a precise number of quarter-turns based on the door’s weight and height. Undo it wrong and the spring can unload with enough force to break bones or worse. This is not a DIY job, and honest garage door companies won’t pretend otherwise. Our techs are background-checked, uniformed, and trained specifically on the spring systems used by LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors.
In Dallas-Fort Worth, the climate also plays a role in spring longevity. The combination of summer heat and sudden temperature swings stressed garage door springs more than in milder climates. Springs in this region typically last 7 to 10 years, and when they fail, they often do so on the hottest afternoons of the year, which is exactly when you need a working door.
How the Process Works: From Call to Fixed Spring
- Call or book online. A real person answers the phone 24/7, and you can also book through our site without a single phone call. Tell us what the door is doing – or not doing. Broken springs usually make a loud bang like a firecracker when they snap, and the door won’t lift more than a few inches.
- Get your written price. The tech arrives in a marked vehicle, inspects the door, and writes down the price before any work starts. You approve it, and only then does the repair begin.
- Track the repair. The Relay Visibility Guarantee means you know when your tech is on the way with a live arrival time, see before-and-after photos of the spring replacement, and receive a digital invoice you can pay from a link.
- Spring replacement and safety check. The old springs come off, new ones go on, and the tech winds them to the correct tension for your specific door. After that, the cables, rollers, and balance are checked to make sure nothing else is about to fail.
- You’re covered for a year. Every spring replacement is backed by the 365-Day Done Right Promise. If the repair isn’t right, Marlow makes it right with a free second visit. It’s in writing, not buried in fine print.
Spring Replacement vs. Full Door Replacement: Which Makes Sense?
If your springs have failed and the rest of the door is in decent shape, spring replacement is the obvious call at $180 to $340 for a single spring. But if the door is 20 years old, the panels are dented, the rollers are grinding, and the opener is on its last legs, you should at least do the math on replacement.
A new garage door in Fort Worth runs $700 to $2,200 installed, depending on size, material, and insulation. A full replacement gets you new springs, new rollers, new cables, new tracks, and a warranty on everything at once. It’s a bigger check to write, but if you’re planning to be in the house for a while, it can be the better long-term value.
The honest guidance from a good tech will always be the same: if the door panels and tracks are solid, replace the springs and keep the door. If you’re already thinking about replacing the door in the next two or three years, don’t throw money at springs that will get scrapped with the old door. We’ll give you a straight answer, and the written price will reflect whichever path you choose. If you want to explore the spring route specifically, jump over to our Spring Replacement in Fort Worth page for more detail on what the job involves.
Where We Work in Fort Worth
Marlow Garage Door Repair is headquartered in Fort Worth and serves the entire metro area, from the historic Fairmount neighborhood south of downtown to the new developments in Alliance and Saginaw. Our techs regularly work in:
- Downtown Fort Worth and the Cultural District
- TCU and the Bluebonnet Circle area
- Ridglea, Ridgmar, and the West Side
- Wedgwood and South Hills
- North Fort Worth, Saginaw, and Haslet
- Arlington Heights and the Hospital District
Spring failure doesn’t respect neighborhood boundaries, and neither do we. A spring snaps in Benbrook at 2 p.m. or in Keller at 2 a.m., the fix is the same: someone needs to answer the phone and someone needs to show up. We do both.
FAQs – Spring Replacement Cost
How much does it cost to replace one garage door spring in Fort Worth?
A single torsion spring replacement in Fort Worth runs $180 to $340 including parts and labor. Extension springs, which are less common but still found on older doors, run $150 to $300. Call (682) 432-0305 for an exact quote after we see the door.
Can you replace garage door springs the same day?
Yes. In most cases Marlow can have a tech at your Fort Worth home the same day you call, and spring replacement itself takes about 45 to 90 minutes for a typical two-car garage door. Call (682) 432-0305 and we’ll give you a real arrival window.
Is it cheaper to repair a broken garage door spring or replace the whole door?
Repairing the spring is almost always cheaper in the short term: $180 to $340 for a spring versus $700 to $2,200 for a new door. But if the door is 20-plus years old and also needs panels, rollers, and an opener, replacement can be the smarter long-term spend. We’ll tell you honestly which path we’d take in your shoes.
Why do garage door springs break in Fort Worth so often?
Fort Worth’s heat and temperature swings stress the metal in torsion springs, and most builders install springs rated for 10,000 cycles, which is roughly 7 to 10 years in Texas heat. When one breaks, the other is usually close behind. High-cycle springs rated for 25,000 cycles or more last longer and cost only $30 to $60 more.
What happens if I only replace one spring instead of both?
Only replacing one spring saves $180 to $340 today, but the remaining spring has the same amount of wear as the one that broke. Most homeowners end up paying for a second service call within six months. We’ll always recommend both springs, but the final call is yours.
Does Marlow offer free estimates for spring replacement?
Yes. We’ll give you a written price before any work starts, and the estimate call itself is free. If you’re not sure whether it’s the spring or something else, call (682) 432-0305 and describe what the door is doing.
For more on what a spring replacement involves and how we handle it, see our main Spring Replacement in Fort Worth page or head back to the home page for an overview of everything we do.
Written by Jaylen Ross, Owner at Marlow Garage Door Repair Fort Worth, serving Fort Worth and the surrounding metro since 2002. Pricing reflects the Fort Worth market as of 2026. Marlow Garage Door Repair Fort Worth offers free estimates – call (682) 432-0305.
What Our Customers Say
"Quote came by text before the visit and didn't change."
- Holly T."Opener remote stopped working. He reprogrammed it and replaced the battery contacts. Paid by link on my phone."
- Latoya S."I could see the tech's name and ETA in the text. Showed up right when the tracker said. Cable repair done in under an hour."
- Omar B.